17
Aug
2001 Nissan Maxima Swirl Control Valve. Swirl control valve vacuum check switch sometimes the car stalls after 15 or 20 minutes it starts back up. The sensor is connected to the front end of the valve shaft of the swirl control valve. We took our code and it was a p1165. P1130 I found the vacuum line between the tank and the swirl actuator disconnected dry and cracked.
P1137 2004 Nissan Sentra Description Swirl control valve position sensor is installed on the intake manifold. 6 Cyl 30L-1999-2001 Nissan Maxima. While idling and during low engine speed operation the swirl control valve closes. 6 Cyl 30L-1999-2001 Nissan Maxima. Swirl control valve vacuum check switch sometimes the car stalls after 15 or 20 minutes it starts back up. Where is that sensor.
And that is what it told us was the problem.
It operates according to the output pulse signal of the ECM. The sensor is connected to the front end of the valve shaft of the swirl control valve. P1130 Swirl Control Valve Circuit Malfunction - With Automatic Transmission Possible Causes Check for air leaks in the Air Induction system eg in the intake manifold Check for leaks or looseness in hoses and tubes between the intake manifold vacuum tank and swirl control valve actuator. Could you help us out on finding the location of it. The valve is installed in the intake manifold and the actuator is connected to the rear end of the valve shaft. I have a 2001 Nissan Sentra 18 cylinder.